Replacement Sensors
The Maxtec line-up of replacement oxygen sensors are specially designed for the harsh environment of recreational and professional diving. Every sensor is equipped with a special water repellent membrane, is tested for a high pressure of up to 16 bar and contains gold-coated electronic contacts for optimum performance. Best of all, our scuba sensors show short response times and have long expected life times in their specific application(s).
MAX-301
Range: 0-100 Vol.%
Output: 8.5 to 12 mV
Connector: 3.5mm mono jack
Special Features: Hydrophobic Membrane
+ learn more
MAX-302
Range: 0-100 Vol.%
Output: 14 to 20 mV
Connector: Gold-plated slip rings
Special Features: Hydrophobic Membrane
+ learn more
MAX-303
Range: 0-100 Vol.%
Output: 22 to 28 mV
Connector: 2-pin Molex
Special Features: Hydrophobic Membrane
+ learn more
MAX-304
Range: 0-100 Vol.%
Output: 10 to 12.5 mV
Connector: 3-pin Molex
Special Features: Hydrophobic Membrane
+ learn more
MAX-305
Range: 0-100 Vol.%
Output: 9 to 12 mV
Connector: 3-pin Molex gold-plated
Special Features: Hydrophobic Membrane
+ learn more
MAX-306
Range: 0-100 Vol.%
Output: 14.5 to 19.5 mV
Connector: Gold-plated slip rings
Special Features: Hydrophobic Membrane
+ learn more
MAX-307
Range: 0-100 Vol.%
Output: 7.5 to 12.5 mV
Connector: RJ11 modular plug 4P4C
Special Features: Hydrophobic Membrane
+ learn more
MAX-308
Range: 0-100 Vol.%
Output: 22 to 28 mV
Connector: 2-pin Molex
Special Features: Hydrophobic Membrane
+ learn more
MAX-309
Range: 0-100 Vol.%
Output: 22 to 28 mV
Connector: 2-pin Molex
Special Features: Hydrophobic Membrane
+ learn more
MAX-310
Range: 0-100 Vol.%
Output: 22 to 28 mV
Connector: Winchester SM2S
Special Features: Hydrophobic Membrane
+ learn more
MAX-312
Range: 0-100 Vol.%
Output: 22 to 28 mV
Connector: 3-pin Molex
Special Features: Hydrophobic Membrane
+ learn more
MAX-250M
Replacement For: Custom applications with Molex connector.
+ learn more
MAX-250s
Replacement For: Extra Stable Sensor for MAX-250 Applications
+ learn more
*Disclaimer: Maxtec warrants the sensor to work according to the stated specifications under normal operating conditions. For sensors used in re-breather applications, Maxtec has not performed validation or verification testing. Verification and validation for use in these applications is the responsibility of the equipment user and/or manufacturer.
© Copyright Maxtec, LLC. All Rights Reserved.
